返回主站 | 设为首页 | 加入收藏      
   
 
  首页 关于我们 产品展示 方案设计 技术分享 行业资讯 联系我们  
 
无线收发IC
2.4G无线收发IC
315MHz/433MHz无线遥控器发射接收IC
功放IC
电源管理IC
马达驱动IC/步进电机控制芯片
数模(DAC)/模数(ADC)转换芯片
智能处理器
音量控制IC
模拟开关IC
电容式触摸感应IC
RGB LED呼吸趣味灯驱动IC
音频CODEC IC
方案设计
电压电平转换器IC
运算放大器
I/O扩展器IC
 
名称:
种类:
类别:

业务洽谈:

联系人:张顺平 
手机:17727550196(微信同号) 
QQ:3003262363
EMAIL:zsp2018@szczkjgs.com

联系人:鄢先辉 
手机:17727552449 (微信同号)
QQ:2850985542
EMAIL:yanxianhui@szczkjgs.com

负责人联络方式:
手机:13713728695(微信同号) 
QQ:3003207580 
EMAIL:panbo@szczkjgs.com
联系人:潘波

 
当前位置:首页 -> 方案设计
STGIB15CH60TS-L马达控制电源板参考设计
文章来源: 更新时间:2016/4/18 13:39:00
ST公司的STGIB15CH60TS-L是SLLIMM™ - 2系列低损耗智能电源模块(IPM),提供在低压MCU和主电源马达间直接连接,工作频率高达20kHz,功率范围高达3kW.器件在25°C时额定电流3A-5A,耐压600V,主要用于马达驱动的三相逆变器,以及家用电器如洗衣机,电冰箱,空调和缝纫机等.本文介绍了STGIB15CH60TS-L 主要特性,功能框图和应用框图,以及马达控制电源板STEVAL-IPM15B主要特性,架构图,电路图,材料清单和PCB设计图.
SLLIMM™ - 2nd series IPM, 3-phase inverter, 20 A, 600 V short-circuit rugged IGBTs ST’s SLLIMM™ family of small low-loss intelligent molded modules enhances the efficiency of home appliance motor drives working up to 20 kHz in hard-switching circuitries and of applications with a power range up to 3 kW.
ST’s intelligent power modules (IPMs) provide a direct connection between a low-voltage microcontroller and a mains-powered electric motor. They greatly reduce costs by simplifying design and significantly reducing component count while saving space, improving reliability and lowering EMI. Available in several package options (fully molded and DBC), current ratings and driving options, they feature the best compromise between conduction and switching losses, along with outstanding robustness and EMI behavior.

STGIB15CH60TS-L主要特性:
3A-5A current rating at 25℃, with 600V breakdown voltage;
Lower VCE(sat) 1.65V even at 5A, due to the TFS technology;
Low EMI;
Mounted slot package options allowing easier and lower-cost heatsink assembly;
Integrated bootstrap diode for lower BOM and simplified PCB layout;
150°C maximum operating junction temperature;
Integrated op amp and comparator that can be used for protection circuits;
Separate open emitter outputs to simplify PCB routing for both single and three shunt solutions;
NTC (Negative Temperature Coefficient) for temperature monitoring;
Smart shutdown function;
In-line and zig-zag lead options, with/without stand-off, for maximum layout flexibility;
1500 Vrms minimum isolation

STGIB15CH60TS-L应用:
• 3-phase inverters for motor drives
• Home appliances such as washing machines,refrigerators, air conditioners and sewing
machines

图1.STGIB15CH60TS-L框图

图2.STGIB15CH60TS-L应用框图

马达控制电源板STEVAL-IPM15B
The STEVAL-IPM15B is a compact motor drive power board based on the SLLIMM™ (small low-loss intelligent molded module) 2nd series module STGIB15CH60TS-L. It provides an affordable, easy-to-use solution for driving high power motors for a wide range of applications such as white goods, air conditioners,compressors, power fans, high-end power tools, and generally 3-phase inverters for motor drives. The IPM itself consists of short-circuit rugged IGBTs and a wide range of features including undervoltage lockout, smart shutdown, temperature sensing and NTC inside, and overcurrent protection. The main characteristics of this evaluation board are its small size, minimal BOM and high efficiency. It consists of an interface circuit (BUS and Vcc connectors), bootstrap capacitors, snubber capacitor, hardware short-circuit protection, fault event signal and temperature monitoring. In order to increase its flexibility,it was designed to work in single or three-shunt configuration and with double current sensing options such as three dedicated op-amps on-board, or op-amps embedded on the MCU. A Hall/Encoder part completes the circuit. Thanks to these advanced characteristics, the system has been specifically designed to achieve accurate and fast conditioning of the current feedback, matching the typical requirements for field-oriented control (FOC). The STEVAL-IPM15B is compatible with ST’s STM32-based control board, providing a complete platform for motor control.

马达控制电源板STEVAL-IPM15B主要特性:
Input voltage: 125 - 400 VDC
Nominal power: up to 1500 W
Input auxiliary voltage: up to 20 V DC
Single- or three-shunt resistors for current sensing (with sensing network)
Two options for current sensing: dedicated op-amps or through MCU
Overcurrent hardware protection
IPM temperature monitoring and protection
Hall sensor or encoder input
Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
Motor control connector (32-pin) to interface with ST MCU boards
Universal conception for further evaluation with breadboard and testing pins
Very compact size

图3.马达控制电源板STEVAL-IPM15B架构图

图4.马达控制电源板STEVAL-IPM15B外形图(正面)

图5.马达控制电源板STEVAL-IPM15B外形图(背面)

图6.马达控制电源板STEVAL-IPM15B电路图(1)

图7.马达控制电源板STEVAL-IPM15B电路图(2)

图8.马达控制电源板STEVAL-IPM15B电路图(3)

图9.马达控制电源板STEVAL-IPM15B电路图(4)

图10.马达控制电源板STEVAL-IPM15B电路图(5)
马达控制电源板STEVAL-IPM15B材料清单:





图11.马达控制电源板STEVAL-IPM15B PCB设计图(正面)

图12.马达控制电源板STEVAL-IPM15B PCB设计图(背面)
 
 
 
    相关产品  
 
深圳市永阜康科技有限公司 粤ICP备17113496号  服务热线:0755-82863877 手机:13242913995