 |
|
| |
|
|
业务洽谈：
联系人：张顺平
手机：17727550196（微信同号）
QQ:3003262363
EMAIL:zsp2018@szczkjgs.com
联系人：鄢先辉
手机：17727552449 （微信同号）
QQ:2850985542
EMAIL:yanxianhui@szczkjgs.com
负责人联络方式：
手机：13713728695（微信同号）
QQ:3003207580
EMAIL:panbo@szczkjgs.com
联系人：潘波 |
|
|
| |
|
 |
|
 |
当前位置：首页 -> 方案设计 |
|
|
| WL18xxMODWiLink2．4GHz模块双天线解决方案 |
|
|
| 文章来源： 更新时间：2015/11/2 11:12:00 |
|
TI公司的WL18xxMOD WiLink™ 8单频段Combo模块,包括Wi-Fi,蓝牙和蓝牙低功耗(BLE),可提供高数据吞吐量和扩展范围,并支持Wi-Fi和蓝牙共存, 工作频率2.4GHz,双天线解决方案.器件经FCC, IC ,ETSI/CE,和 TELEC认证,适用于接入点 (AP) 和客户端,主要用在物联网(IOT),工业和家庭自动化,多媒体,智能网关和计量,家用电器和电子,视频会议,摄像机.本文介绍了WL18xxMOD主要特性,框图,典型应用-WL1835MOD参考设计及其材料清单,WiLink 1835模块天线参考设计主要特性,电路图,材料清单和PCB设计文件.
WL18xxMOD WiLink™ 8 Single-Band Combo Module –Wi-Fi®,Bluetooth ®,and BluetoothLow Energy (BLE).The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi andBluetooth coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP andclient. TI offers drivers for high-level operating systems such as Linux®, Android™, WinCE, and RTOS.
WL18xxMOD主要特性：
WL18xxMOD应用:
• Internet of Things
• Industrial and Home Automation
• Multimedia
• Smart Gateway and Metering
• Home Electronics
• Video Conferencing
• Home Appliances and White Goods
• Video Camera and Security
图1.WL1835功能框图
图2.WL1835典型应用-WL1835MOD参考设计
WL1835MOD参考设计材料清单:
WiLink 1835模块天线参考设计WL1835MODCOM8B
The WiLink 1835 Module Antenna Design is a reference design that combines the functionalities of the WiLink 8 module with a built-in antenna on a single board, implementing the module in the way it’s been certified. Through this, customers are able to evaluate the performance of the module through embedded applications such as home automation and the Internet of Things that make use of both Wi-Fi and Bluetooth/Bluetooth Low Energy functionalities found on the WiLink 1835 module. This antenna design leverages the use of its certification by using the same antenna layout when the module was tested for certification, allowing customers to avoid repeated certification when creating their applications.
WiLink 1835模块天线参考设计主要特性:
• WLAN, Bluetooth, BLE on a module board
• 100-pin board card
• Dimension 76.0 mm(L) x 31.0 mm(W)
• WLAN 2.4 GHz SISO (20- and 40-MHz channels), 2.4-GHz MIMO (20-MHz channels)
• Support for BLE dual mode
• Seamless integration with TI Sitara and other application processors
• Design for TI AM335X general-purpose EVM
• WLAN and Bluetooth, BLE cores are software and hardware compatible with prior WL127x, WL128xand CC256x offerings, for smooth migration to device.
• Shared HCI transport for Bluetooth and BLE over UART and SDIO for WLAN.
• Wi-Fi / Bluetooth single antenna co-existence
• Built-in chip antenna
• Optional U.FL RF connector for external 2.4-GHz band antenna
• Direct connection to battery using external switching mode power supply supporting 4.8-V to 2.9-Voperation
• VIO in the 1.8-V domain
TI Module Key Benefits
• Reduces Design Overhead: Single WiLink8™ Module Scales Across Wi-Fi and Bluetooth.
• WLAN High Throughput: 80 Mbps (TCP), 100 Mbps (UDP)
• Bluetooth 4.0 + BLE (Smart Ready)
• Wi-Fi-Bluetooth Single Antenna Coexistence
• Low Power (30–50% Less than Previous Generation)
• Available as Easy-to-Use FCC, ETSI, and Telec Certified Module
• Lower Manufacturing Costs, Saving Board Space and Minimizing RF Expertise
• AM335x Linux® and Android™ Reference Platform Accelerates Customer Development and Time to Market
图3.WL1835MODCOM8B外形图
WL1835MODCOM8B应用:
• Internet of Things Multimedia
• Home Electronics
• Home Appliances and White Goods
• Industrial and Home Automation
• Smart Gateway and Metering
• Video Conferencing
• Video Camera and Security
图4.WL1835MODCOM8B电路图
WL1835MODCOM8B材料清单:
图5.WL1835MODCOM8B板元件布局图(顶层)
图6.WL1835MODCOM8B板图(底层)
图7.WL1835MODCOM8B板PCB设计图(1层)
图8.WL1835MODCOM8B板PCB设计图(2层)
图9.WL1835MODCOM8B板PCB设计图(3层)
图10.WL1835MODCOM8B板PCB设计图(4层) |
|
| |
| |
|
|
|
