On Semi公司的AMIS-39101是带保护的8路大电流输出高边驱动器,每个驱动对可提供830mA连续电流,外接一个电容可形成电荷泵,主要用在工业应用如马达,继电器和LED阵列等.本文介绍了AMIS-39101主要特性,框图,典型应用电路以及评估板AMIS−3910XGEVB主要特性,电路图,材料清单和PCB元件布局图.
The AMIS-39101 is a robust high side driver featuring eight independent high current output drive channels along with a number of integrated fault protection circuits. This highly integrated product is designed for controlled delivery of power to a large variety of loads in industrial applications including motors, relays and LED arrays, among others. With all driver output channels in the conducting state, each channel can source up to 350 mA of continuous current (resistive load). In cases where all output drivers are not active, higher output current per channel can be achieved provided that the thermal limits of the device are not exceeded.
Furthermore, in order to minimize system cost each output driver has built-in fly-back diodes. The device withstands short circuits to ground and supply, respectively. It is designed with an array of integrated protection features including overtemperature and overcurrent detection and shutdown. The integrated charge pump requires only one external capacitor and provides for operation of the critical fault protection circuitry even in case of low supply voltages. The device can be interfaced to a variety of microcontrollers via the serial interface link, in turn allowing for monitoring and controlling the state of each of the output drivers individually. In this case, at the onset of a potential hazardous situation the drivers are switched off and the diagnostic state of the drivers can be extracted via the serial interface. The device also features a power down mode for reduced power consumption and has high built-in electrostatic discharge (ESD) protection capability for robust operation.

AMIS-39101主要特性:
Eight high side output drivers
Up to 830mA continuous current per driver pair (resistive load)
Charge pump with one external capacitor
Serial interface
Short-circuit protection
Diagnostic features
Power-down mode
Internal thermal shutdown
3.3 V and 5 V microcontroller compliant
Excellent system ESD
Automotive compliant

AMIS-39101应用:
Actuators
LEDs
Solenoids
Smart junction boxes
Power management modules   
Automobiles


图1. AMIS-39101框图

图2. AMIS-39101典型应用电路图

评估板AMIS−3910XGEVB
The AMIS−3910XGEVB evaluation board demonstrates the AMIS−39101 high side driver in SOIC package. The evaluation board includes all external components needed for operating AMIS−39101 and to demonstrate the small PCB surface area such an implementation requires.

评估板AMIS−3910XGEVB主要特性:
Eight High Side Output Drivers
Up to 830 mA Continuous Current per Driver Pair (Resistive Load)
Charge Pump with One External Capacitor
Serial Interface
Short−circuit Protection
Diagnostic Features
Power−down Mode
Internal Thermal Shutdown
3.3 V and 5 V Microcontroller Compliant
Excellent System ESD
Automotive Compliant
Temperature Range of −40℃ to +150℃
Available in 28−pin SOIC
These are Pb−Free Devices

图3. 评估板AMIS−3910XGEVB外形图

图4. 评估板AMIS−3910XGEVB电路图
评估板AMIS−3910XGEVB材料清单:


图5. 评估板AMIS−3910XGEVB PCB元件布局图:顶层

图6. 评估板AMIS−3910XGEVB PCB元件布局图:底层